 |
 |
 |
 |
 |
Corner elements, thanks to this special form flange profile now locks itself. Corner elements, flanges in line for a 20, are produced in the 30 percent and 40 health. The aim of our company staff locked the corner patented flange connections complete with zero error, the resulting air pressure and air leakage from the corner of a permanent solution to prevent channel esnemelerinde channel | ||
Connection Equipment and Accessories
|
|
|
|
 |
Flanges, 20 mm, 30 mm, 40 mm wide and 5 meters height standards are produced and flange lock combined with a special corner elements.
Galvanized Steel Sheet, Stainless Steel and Aluminum flanges are made of three separate Series I, Series II, Series III, the three different type. 0.70 mm 0.80 mm - 1.00 mm material thickness of galvanized flanşlarımızda produced about 200 microns.
Has a special chemical mixture used in the paste does not burn, dry out and the air do not mix (not fly), the feature of
 |
In order to make connections, vibration damping device and the fan-coil air is used as a flexible connection between the channel and device. |
|
|
|
 |
 |
2 mm and 2.5 mm sheet metal screw compression clips produced; ergonamik dimensions and aesthetic appearance of the application with ease. Clips, the external side of the hold placed on the belt and blasting two strength than counterparts with the form guide resistant and permanent.
 |
Channels are used to distinguish whether the T dowels Ø 9.50 mm, Ø 11 mm are two different types, according to the implementation phase of about 15 cm - 20 cm is used. Routing anchors are used together with seals, sealed at the same time very practical application. |
